Channel Master CM-5020 Spécifications télécharger pdf (Page 18)

Detail

3.7 ATIS (inland waterways only)

ATIS is mandatory to use in inland waterways on e.g. the Rhine. ATIS is a digital data

stream containing ships call sign coded into a DSC-like message, sent over the voice

channel each time the PTT button is released. If PTT is continuously pressed ATIS is

automatically sent each 5 minutes.

ATIS is enabled automatically when BI is selected in menu (4.4.1).

For purpose of operator comfort the received ATIS signal on the active voice channel will be

muted.

The ATIS call sign is programmable from the service interface or from menu 4.4.3. once.

The format of the programmed ATIS code is entered according to the following call sign

prefix conversion table:

Character Phonetic Value Character Phonetic Value

AAl

ha 1 N November 14

B Bravo 2 O Oska

CCharlie3 P Pa

a16

D Delta 4 Q Quebec 17

E Echo 5 R Romeo 18

F Foxtrot 6 S Sierra 19

GGolf7 TTan

o20

H Hotel 8 U Uniform 21

I India 9 V Victor 22

J Juliett 10 W Whiske

K Kilo 11 X X-ra

L Lima 12 Y Yankee 25

MMike13 Z Zulu26

I.e. a Dutch (MID-number 244) ship with call sign SP1234, should be programmed with the

following number:

244P1234

with the digit 2 entered as the first digit, and the digit 4 as the last digit.

3.8 Transmitter power

Transmitter output power can always be chosen while the radio is active. Pressing the 1W

button will toggle the transmitter power between low power (below 1W) and high power

(below 25W). The 1W indicator is lit when low power is selected. As a default any channel

shift will cause the transmitter power to be adjusted to the maximum power allowed on that

channel.

0544

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 67 68

Pas de commentaire

Channel Master CM-5020 Spécifications Page 18